 English |
|
|
|
|
|
|
|
| STM32F103ZEH6 Datasheet, PDF (61/130 Pages) STMicroelectronics – High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces | |||
| |||
| ◁ |
STM32F103xC, STM32F103xD, STM32F103xE
Electrical characteristics
Table 26. LSI oscillator characteristics (1)
Symbol
Parameter
Min
tsu(LSI)(3)
IDD(LSI)(3)
LSI oscillator startup time
LSI oscillator power consumption
1. VDD = 3 V, TA = â40 to 105 °C unless otherwise specified.
2. Based on characterization, not tested in production.
3. Guaranteed by design, not tested in production.
Typ
0.65
Max
Unit
85
µs
1.2
µA
Wakeup time from low-power mode
The wakeup times given in Table 27 is measured on a wakeup phase with a 8-MHz HSI RC
oscillator. The clock source used to wake up the device depends from the current operating
mode:
â Stop or Standby mode: the clock source is the RC oscillator
â Sleep mode: the clock source is the clock that was set before entering Sleep mode.
All timings are derived from tests performed under ambient temperature and VDD supply
voltage conditions summarized in Table 10.
Table 27. Low-power mode wakeup timings
Symbol
Parameter
Typ
Unit
tWUSLEEP(1) Wakeup from Sleep mode
1.8
µs
tWUSTOP(1)
Wakeup from Stop mode (regulator in run mode)
Wakeup from Stop mode (regulator in low power mode)
3.6
µs
5.4
tWUSTDBY(1) Wakeup from Standby mode
50
µs
1. The wakeup times are measured from the wakeup event to the point in which the user application code
reads the first instruction.
Doc ID 14611 Rev 8
61/130
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese