UM0894 Datasheet, PDF (6/45 Pages) STMicroelectronics – STM32W-SK and STM32W-EXT starter and extension kits for STM32W108xx microcontrollers

Getting started
1
Getting started
UM0894
Note:
1.1
1.1.1
This section provides a complete description of the STM32W-SK and STM32W-EXT kit’s
hardware and software.
There are two types of STM32W108xx kits:
● The starter kit (order code: STM32W108C-SK)
● The extension kit (order code: STM32W108C-KEXT)
1. Order code STM32W108B-KEXT is replaced by STM32W108C-KEXT.
2. STM32W108C-SK and STM32W108C-KEXT contain STM32W108CC (256-Kbyte Flash).
3. STM32W108B-SK and STM32W108B-KEXT contain STM32W108xB (128-Kbyte Flash).
Kit description
Hardware
STM32W108B-SK
The STM32W108xx starter kit package (STM32W108B-SK) contains the following hardware
components:
● Two STM32W108 application boards (MB851)
● One STM32W108 extension board (MB850)
● One Raisonance STM32-Primer2 tool (STM3210E-PRIMER)
● One J-Link Lite JTAG Flash programmer and debugger
● One mini USB cable
● Four AAA batteries
Figure 1. STM32W108B-SK starter kit
Network Analyzer (Perytons)
J-Link Lite +
IAR compiler
MB851 application board x2
MB850
extension board
+
STM32-Primer2
6/45
Doc ID 16999 Rev 6