LPY510AL Datasheet, PDF (6/12 Pages) STMicroelectronics – MEMS motion sensor: dual axis pitch and yaw ±100°/s analog gyroscope

Mechanical and electrical specifications
LPY510AL
2.2
Electrical characteristics
Table 4. Electrical characteristics @ Vdd =3 V, T=25 °C unless otherwise noted⁽¹⁾
Symbol
Parameter
Test condition
Min.
Typ.⁽²⁾
Max.
Unit
Vdd Supply voltage
2.7
3
3.6
V
Idd
Supply current
PD pin connected to GND
6.8
mA
IddPdn
Supply current in
power-down mode
PD pin connected to Vdd
1
5
µA
VST
Self-test input
Logic 0 level
Logic 1 level
0
0.8*Vdd
0.2*Vdd
V
Vdd
VPD Power-down input
Logic 0 level
Logic 1 level
0
0.8*Vdd
0.2*Vdd
V
Vdd
Top
Operating temperature
range
-40
+85
°C
1. The product is factory calibrated at 3 V
2. Typical specifications are not guaranteed
2.3
Absolute maximum ratings
Stresses above those listed as “Absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 5.
Symbol
Absolute maximum ratings
Ratings
Vdd Supply voltage
Vin Input voltage on any control pin (PD, ST)
A Acceleration
T_STG Storage temperature range
ESD Electrostatic discharge protection
Maximum value
Unit
-0.3 to 6
V
-0.3 to Vdd +0.3
V
3000 g for 0.5 ms
10000 g for 0.1 ms
-40 to +125
°C
2 (HBM)
kV
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part
This is an ESD sensitive device, improper handling can cause permanent damage to
the part
6/12
Doc ID 15805 Rev 2