LPR510AL Datasheet, PDF (6/12 Pages) STMicroelectronics – MEMS motion sensor: dual axis pitch and roll ±100°/s analog gyroscope

Mechanical and electrical specifications
LPR510AL
2.2
Electrical characteristics
Table 4. Electrical characteristics @ Vdd =3 V, T=25 °C unless otherwise noted⁽¹⁾
Symbol
Parameter
Test condition
Min.
Typ.⁽²⁾
Max.
Unit
Vdd Supply voltage
2.7
3
3.6
V
Idd
Supply current
PD pin connected to GND
6.8
mA
IddPdn
Supply current in
power-down mode
PD pin connected to Vdd
1
5
µA
VST
Self-test input
Logic 0 level
Logic 1 level
0
0.8*Vdd
0.2*Vdd
V
Vdd
VPD Power-down input
Logic 0 level
Logic 1 level
0
0.8*Vdd
0.2*Vdd
V
Vdd
Top
Operating temperature
range
-40
+85
°C
1. The product is factory calibrated at 3 V
2. Typical specifications are not guaranteed
2.3
Absolute maximum ratings
Stresses above those listed as “Absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 5. Absolute maximum ratings
Symbol
Ratings
Vdd
Vin
T_STG
Supply voltage
Input voltage on any control pin (PD, ST)
Storage temperature range
A Acceleration
ESD Electrostatic discharge protection
Maximum value
Unit
-0.3 to 6
V
-0.3 to Vdd +0.3
V
-40 to +125
°C
3000 g for 0.5 ms
10000 g for 0.1 ms
2 (HBM)
kV
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part
This is an ESD sensitive device, improper handling can cause permanent damage to
the part
6/12
Doc ID 15811 Rev 2