EMIF06-10006F1 Datasheet, PDF (6/6 Pages) STMicroelectronics – 6 LINES EMI FILTER AND ESD PROTECTION

EMIF06-10006F1
FLIP-CHIP TAPE AND REEL SPECIFICATION
Dot identifying Pin A1 location
4 +/- 0.1
Ø 1.5 +/- 0.1
0.73 +/- 0.05
All dimensions in mm
4 +/- 0.1
User direction of unreeling
OTHER INFORMATION
Ordering code
Marking
EMIF06-10006F1
FTT
Package
Flip-Chip
Weight
5.4 mg
Base qty
5000
Delivery mode
Tape & reel
Note: More packing informations are available in the application note AN1235: ''Flip-Chip: Package description and
recommandations for use''
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written
approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
© 2003 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany
Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore
Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
6/6