STM32L162QC Datasheet, PDF (57/128 Pages) STMicroelectronics – AES-128 bit encryption hardware accelerator

STM32L162xC/C-A
Electrical characteristics
4.
Positive current injection is not possible on these I/Os. A negative injection
exceeded. Refer to Table 10 for maximum allowed input voltage values.
is
induced
by
V_IN<V_SS.
I_INJ(PIN)
must
never
be
5.
A positive injection
exceeded. Refer to
i_Ts_ain_bd_leu₁ce₀d_{: V}b_oy_ltV_agINe>_chV_aDrDacw_teh_ril_ie_stia_csnefogratthiveeminajexcimtiounmisalilnodwuecdedinbpyutVv_{IoNlt<agVeSSv.aIlIuNeJs(P.IN)}
must
never
be
6.
When several inputs are submitted to a current injection,
negative injected currents (instantaneous values).
the
maximum
ΣI_INJ(PIN)
is
the
absolute
sum
of
the
positive
and
Table 12. Thermal characteristics
Symbol
Ratings
Value
Unit
T_STG
T_J
Storage temperature range
Maximum junction temperature
–65 to +150
°C
150
°C
6.3
Operating conditions
6.3.1
General operating conditions
Table 13. General operating conditions
Symbol
Parameter
Conditions
Min
Max
Unit
f_HCLK
f_PCLK1
f_PCLK2
Internal AHB clock frequency
Internal APB1 clock frequency
Internal APB2 clock frequency
-
-
-
BOR detector disabled
V_DD Standard operating voltage
BOR detector enabled, at
power on
BOR detector disabled, after
power on
V_DDA(1)
Analog operating voltage
(ADC and DAC not used)
Analog operating voltage
(ADC or DAC used)
Must be the same voltage as
V_DD(2)
V_IN I/O input voltage
FT pins; 2.0 V ≤V_DD
FT pins; V_DD < 2.0 V
BOOT0 pin
Any other pin
UFBGA132 package
P_D
Power dissipation at TA = 85 °C for
suffix 6 or TA = 105 °C for suffix 7⁽⁴⁾
LQFP144 package
LQFP100 package
LQFP64 package
Ambient temperature for 6 suffix version Maximum power dissipation⁽⁵⁾
TA
Ambient temperature for 7 suffix version Maximum power dissipation
0
0
0
1.65
1.8
1.65
1.65
1.8
-0.3
-0.3
0
-0.3
-
-
-
-
–40
–40
32
32
32
3.6
3.6
3.6
3.6
3.6
5.5⁽³⁾
5.25⁽³⁾
5.5
V_DD+0.3
333
500
465
435
85
105
MHz
V
V
V
mW
°C
DocID026175 Rev 4
57/128
111