ST7MDTU5-EMU2B Datasheet, PDF (5/71 Pages) –

ST7MDTU5-EMU2B User Manual
1 - Introduction
1
Note:
INTRODUCTION
Thanks for choosing ST7! This manual will help you get started with the
ST7MDTU5-EMU2B emulator kit.
The ST7MDTU5-EMU2B emulator allows you to control the execution of programs
that you have written for the ST7265x family of MCUs (see list below) and assists
you in debugging your application hardware as well as your software. The
ST7MDTU5-EMU2B kit comes with the debugger software package—ST7 Visual
Debug—which contains all of the necessary resources to help you design, develop
and debug ST7 application software running in a real environment.
If you come across any terms or abbreviations you do not understand, you can check their
meaning in the Glossary on page 63.
First off, check that the ST7 MCU that you have picked for your application is in the
list of devices supported by this version of the ST7MDTU5-EMU2B emulator:
Supported Devices
ST72651
ST72F651
ST72652
ST72F652
Note:
The Emulator Package is made up of two main parts:
• The Hardware Development System (ST7 HDS2), which is the common
mainframe to all ST7 emulators.
• The ST7MDTU5-Active Probe, dedicated to the family, which constitutes the
physical link between the emulator and your application.
When receiving the ST7MDTU5-EMU2B development tool, please refer to the Delivery
checklist on page 11 to confirm that all of the contents of the package are present.
The emulator performs two main functions:
• It replaces the microcontroller in the application, by means of an emulation
probe that is plugged into the application in place of the emulated MCU.
• It controls the internal data bus of the emulated microcontroller, providing
arbitration and tracing capabilities on all accesses to any of the following
resources:
5/71
1