M25PE16 Datasheet, PDF (47/56 Pages) STMicroelectronics – 16 Mbit, low-voltage, Page-Erasable Serial Flash memory with byte-alterability, 50 MHz SPI bus, standard pinout

M25PE16
11 DC and AC parameters
DC and AC parameters
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC Characteristic tables that
follow are derived from tests performed under the Measurement Conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
Table 14. Operating conditions
Symbol
Parameter
Min.
Max.
V_CC
Supply Voltage
T_A
Ambient Operating Temperature
2.7
3.6
–40
85
Table 15. AC measurement conditions
Symbol
Parameter
Min.
Max.
C_L
Load Capacitance
Input Rise and Fall Times
30
5
Input Pulse Voltages
Input and Output Timing Reference Voltages
0.2V_CC to 0.8V_CC
0.3V_CC to 0.7V_CC
1. Output Hi-Z is defined as the point where data out is no longer driven.
Figure 24. AC measurement I/O waveform
Input Levels
0.8VCC
0.2VCC
Input and Output
Timing Reference Levels
0.7VCC
0.3VCC
AI00825B
Unit
V
°C
Unit
pF
ns
V
V
Table 16. Capacitance⁽¹⁾
Symbol
Parameter
Test Condition
Min.
C_OUT
Output Capacitance (Q)
V_OUT = 0V
C_IN
Input Capacitance (other pins)
V_IN = 0V
1. Sampled only, not 100% tested, at T_A=25°C and a frequency of 20 MHz.
Max.
8
6
Unit
pF
pF
47/56