STM32F051C6T6 Datasheet, PDF (45/104 Pages) STMicroelectronics – Low- and medium-density advanced ARM-based 32-bit MCU with 16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

Electrical characteristics
STM32F051x
Typical and maximum current consumption
The MCU is placed under the following conditions:
● All I/O pins are in input mode with a static value at V_DD or V_SS (no load)
● All peripherals are disabled except when explicitly mentioned
● The Flash memory access time is adjusted to the f_HCLK frequency (0 wait state from 0
to 24 MHz and 1 wait state above 24 MHz)
● Prefetch is ON when the peripherals are enabled, otherwise it is OFF (to enable
prefetch the PRFTBE bit in the FLASH_ACR register must be set before clock setting
and bus prescaling)
● When the peripherals are enabled f_PCLK = f_HCLK
The parameters given in Table 25 to Table 29 are derived from tests performed under
ambient temperature and supply voltage conditions summarized in Table 20.
46/105
Doc ID 022265 Rev 3