STLVDS9637 Datasheet, PDF (4/10 Pages) STMicroelectronics – OPERATES WITH A SINGLE 3.3V SUPPLY

STLVDS9637
SWITCHING CHARACTERISTICS (Unless otherwise noted. Typical values are referred to T_A = 25°C
and V_CC = 3.3V)
Symbol
Parameter
Test Conditions
Min. Typ. Max. Unit
t_PLH Propagation Delay Time,
Low to High Output
C_L = 10pF Fig. 1
1.5
2.5
3.3
ns
t_PHL Propagation Delay Time,
High to Low Output
1.5
2.5
3.3
ns
t_r Differential Output Signal
Rise Time
0.4
ns
t_f Differential Output Signal
Fall Time
0.4
ns
t_sk(O) Channel to Channel Output
Skew (note1)
0.1
0.3
ns
t_sk(P) Pulse Skew (|t_PHL - t_PLH|)
(note2)
0.2
0.4
ns
t_sk(PP) Part to Part Skew (note3)
1
ns
t_PZH Propagation Delay Time,
High Impedance to High
) _{Level Output}
t(s ^tPZL ^{Propagation Delay Time,}
c High Impedance to Low
u Level Output
d _{tPHZ Propagation Delay Time,}
ro ^{High Level to High}
Impedance Output
P _{tPLZ Propagation Delay Time,}
te Low Level to High
le ^{Impedance Output}
Fig. 2
3
12
ns
5
12
ns
5
12
ns
5
12
ns
o Note 1: t_sk(O) is the maximum delay time difference between the propagation delay of one channel and that of the others on the same chip
s with any event on the inputs.
b ^{Note 2: t}sk(P) ^{is the magnitude difference in differential propagation delay time between the positive going edge and the negative going edge}
of the same channel.
O Note 3: t_sk(PP) is the differential channel-to-channel skew of any event between devices. This specification applies to devices at the same
Obsolete ^{Product(s) - VCC, and within 5°C of each other within the operating temperature range.}
4/10