STCC08 Datasheet, PDF (4/13 Pages) STMicroelectronics – AC switch failure mode detector

Characteristics
STCC08
Table 5. Electrical characteristics
Symbol Pin
Name
Conditions
Min Typ Max Unit
Switch drive (respect to GND, T_j=25 °C unless otherwise specified, R_IG=30 Ω)
I_QUIESCENT V_CC Quiescent current
IN = GND
2
mA
V_ON
IN
On-state switch
activation voltage
0.7*V_CC
V
V_OFF
IN
Off-state switch
release voltage
0.3*V_CC V
I_IN
IN Input drive current
V_in > V_on
50
µA
I_G
G Gate drive current
V_in > V_on
20
28
mA
I_AC
AC Detection threshold
82
236
µA
Status output (respect to GND, T_j=25 °C unless otherwise specified)
V_OH
AVF
Minimum output
voltage
I_AVF = 50 µA
0.7*V_CC
V
I_AVF = 50 µA
(CMOS Compatible)
V_OL
AVF Maximum drop voltage _{IAVF = 5 mA}
(Opto-transistor
compatible)
0.3*V_CC V
1
V
Table 6. Thermal resistance
Symbol
Parameter name and conditions
Value
Unit
R_{TH (j-a)} SMD Thermal resistance Junction to Ambient
140
°C/W
Table 7. System related electromagnetic compatibility ratings
Symbol Node Pin
Parameter name and conditions
Value Unit
V_CC
ESD protection, IEC 61000-4-2, per input, against air
discharge
Neutral
V_ESD
G
Gate through ACS; ESD protection, IEC 61000-4-2, pin to
ground, against air discharge
±8
kV
Line
AC
Alternating current through R_AC = 300 kΩ; ESD protection,
IEC 61000-4-2, pin to ground, against air discharge
V_ESD
Neutral
V_CC
ESD protection, IEC 61000-4-2, pin to ground, for contact
discharge⁽¹⁾
±6
kV
V_PPB
V_CC Total Peak Pulse Voltage Burst, IEC 61000-4-4⁽¹⁾
Neutral
G
Gate through ACS; Total Peak Pulse Voltage Burst, IEC
61000-4-4 ⁽¹⁾
±4 kV
Line
AC
Alternating current through R_AC; Total Peak Pulse Voltage
Burst, IEC 61000-4-4⁽¹⁾
1. System oriented test circuits - see Application note AN2716
4/13