UM1870 Datasheet, PDF (30/58 Pages) STMicroelectronics – BlueNRG-MS development kits

GUI software description
UM1870
Note:
3.2.4
1. In the BlueNRG-MS GUI, Scripts window, Script Engine section, click on tab “…”,
browse to the script location and select the script
2. Click on the “Run Script” tab to run the script. The execution flow (commands and
events) will be displayed in the BlueNRG-MS GUI “Sent/Received Packets” section
In the BlueNRG-MS DK 1.7.0 and future versions, some reference BlueNRG-MS scripts are
available in the GUI/scripts folder.
It is worthy of note that in order to write and use the BlueNRG-MS scripts, the user is
required to have some knowledge of the Python language (Python 2.7.6), and a good
understanding of the BlueNRG-MS ACI commands and related events. For a detailed
description of the BlueNRG-MS ACI commands and related events, refer to the BlueNRG-
MS Bluetooth LE stack application command interface (ACI) user manual UM1865.
GUI Beacon window
The BlueNRG-MS GUI Beacon window provides some tabs allowing configuration of a
BlueNRG-MS device as a BLE Beacon device which transmits advertising packets with
specific manufacturer data.
Figure 11. BlueNRG-MS GUI Beacon window
The user can configure the following advertising data fields for the BLE Beacon device,
through the BlueNRG-MS GUI Beacon window configuration parameters.
30/58
DocID027602 Rev 1