TS982 Datasheet, PDF (3/20 Pages) STMicroelectronics – Wide bandwidth dual bipolar operational amplifier

TS982
1
Absolute maximum ratings and operating conditions
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
V_CC
V_in
T_oper
T_stg
T_j
R_thja
R_thjc
ESD
Latch-up
Parameter
Supply voltage⁽¹⁾
Input voltage
Operating free-air temperature range
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient⁽²⁾
Thermal resistance junction to case
Human body model (HBM)l⁽³⁾
Charged device model (CDM)⁽⁴⁾
Machine model (MM)⁽⁵⁾
Latch-up immunity (all pins)
Lead temperature (soldering, 10sec)
Output short-circuit duration
Value
6
-0.3 V to V_CC +0.3 V
-40 to + 125
-65 to +150
150
45
10
2
1.5
200
200
250
see note ⁽⁶⁾
Unit
V
V
°C
°C
°C
°C/W
°C/W
kV
kV
V
mA
°C
1. All voltage values are measured with respect to the ground pin.
2. With two sides, two-plane PCB following the EIA/JEDEC JESD51-7 standard.
3. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
4. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
6. Short-circuits can cause excessive heating. Destructive dissipation can result from a short-circuit on one or
two amplifiers simultaneously.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
V_CC
Supply voltage
V_icm
Common mode input voltage range
Load capacitor
C_L
R_L < 100 Ω
R_L > 100 Ω
2.5 to 5.5
V
GND to V_CC
V
400
pF
100
3/20