TS912_06 Datasheet, PDF (3/19 Pages) STMicroelectronics – Rail-to-Rail CMOS Dual Operational Amplifier

TS912
2
Absolute Maximum Ratings and Operating Conditions
Absolute Maximum Ratings and Operating
Conditions
Table 1. Key parameters and their absolute maximum ratings
Symbol
V_CC
Vid
V_i
I_in
I_o
T_oper
T_stg
T_j
R_thja
Parameter
Supply voltage ⁽¹⁾
Differential Input Voltage ⁽²⁾
Input Voltage ⁽³⁾
Current on Inputs
Current on Outputs
Operating Free Air Temperature Range
TS912I/AI/BI
Storage Temperature
Maximum Junction Temperature
Thermal Resistance Junction to Ambient ⁽⁴⁾
DIP8
SO-8
Value
18
±18
-0.3 to 18
±50
±130
-40 to + 125
-65 to +150
150
85
125
Unit
V_CC
Vid
V_i
I_in
I_o
T_oper
T_stg
T_j
°C/W
R_thjc
ESD
Thermal Resistance Junction to Case
DIP8
SO-8
HBM: Human Body Model⁽⁵⁾
MM: Machine Model⁽⁶⁾
CDM: Charged Device Model
41
40
3
200
1500
°C/W
kV
V
kV
1. All voltages values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed V_CC+ +0.3V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuit on all
amplifiers. These values are typical.
5. Human body model, 100pF discharged through a 1.5kΩ resistor into pin of device.
6. Machine model ESD, a 200pF cap is charged to the specified voltage, then discharged directly into the IC with no external
series resistor (internal resistor < 5Ω), into pin to pin of device.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
V_CC
Supply voltage
V_icm
Common Mode Input Voltage Range
2.7 to 16
V
V_CC- -0.2 to V_CC+
+0.2
V
3/19