LCDP1521S Datasheet, PDF (3/13 Pages) STMicroelectronics – Dual line programmable transient voltage suppressor for SLIC protection

LCDP1521S
Symbol
Characteristics
Table 3: Absolute ratings ((0 °C < Tj < 70 °C, unless otherwise specified))
Parameter
Value
Unit
Telcordia GR-1089-
CORE Issue 6, May
10/1000 µs
25
2011, section 4
TIA-968-A,
lightning surge type A
10/560 µs
30
ITU-T K20/21/44/45,
(10/700 µs open circuit
5/310 µs
40
voltage waveshape)
TIA-968-A,
Ipp
Peak pulse current⁽¹⁾ lightning surge type A
10/160 µs
45
A
IEC 61000-4-5,
(1.2/50 µs open circuit
2/40 µs
85
waveshape) with 10 Ω
ITU-T K20/21/44/45,
(1.2/50 µs open circuit
8/20 µs
90
voltage waveshape)
Telcordia GR-1089-
CORE Issue 6, (2/10 µs
2/10 µs
100
open circuit waveshape)
Non repetitive surge
ITSM peak on-state current
(50 Hz sinusoidal)⁽¹⁾
t = 0.2 s
t=1s
t=2s
t = 15 mn
5
3.5
A
3
1.3
VGN
Negative battery
voltage range
-40 °C < Tamb <
+85 °C
-175
V
Tstg Storage junction temperature range
Tj
Maximum operating junction temperature
-55 to + 150 °C
TL Maximum temperature for soldering during 10 s
260
°C
Notes:
(1)_{The rated current values may be applied either to the Ring to GND or to the Tip to GND terminal pairs.}
Additionally, the four terminal pairs may have their rated current values applied simultaneously (in this case the
GND terminal current will be four times the rated current value of an individual terminal pair)
Doc16268 Rev 7
3/13