EVAL6207Q Datasheet, PDF (3/10 Pages) STMicroelectronics – Dual full bridge with integrated PWM current controllers

EVAL6207Q
Board description
Pin
2
3
4
5
6
11
12
13
14
16
23
24
25
27
28
29
30
Others
Table 2. Control board connector pinout (J2)
Type
Function
Ground
Ground
Logic input
Logic input
Logic input
Logic input
Input IN1A of L6207Q
Input IN2A of L6207Q
Input IN1B of L6207Q
Input IN2B of L6207Q
Analog input
Overcurrent threshold regulation for A bridge
Analog input
Ground
Supply voltage
Logic input
Overcurrent threshold regulation for B bridge
Ground
3.3 V supply voltage
Input ENA of L6207Q
Ground
Analog output
Analog output
Logic output
Ground
Board identification system ID0
Board identification system ID1
Fault output for B bridge
Ground
Ground
Logic output
Logic input
Unconnected
Fault output for A bridge
Input ENB of L6207Q
Table 3. Current sensing connector (J9)
Pin
Type
Function
1
Ground
2
Analog output
3
Analog output
4
Ground
Ground
SENSEA pins of L6207Q⁽¹⁾
SENSEB pins of L6207Q⁽¹⁾
Ground
1. R22/23 resistors and C12/13 capacitors must be added when output is used. The value of RC network
should be chosen according to the target low pass frequency of the filter.
DocID025098 Rev 1
3/10
10