EV-VN7040AS Datasheet, PDF (3/7 Pages) STMicroelectronics – Thermal shutdown indication

EV-VN7040AS
Board connections
2
Board connections
Figure 2: "Evaluation board connections" shows the placement of the connectors to be
used for supplying the evaluation board, connecting the load and controlling the
functionality and diagnostic of the device.
Figure 2: Evaluation board connections
Table 2: J3 connector: pin functions
Connector
J3
J3
J3
J3
J3
J3
J3
J3
J3
Pin
number
1…4
5
6
7
8
9
10…12
13
14…18
Pin name
Pin function
N/A
Not connected
IN_PullUP Connection to optional external pull-up resistor for open load
detection in off-state.
+5V
5 V Power Supply
N/A
Not connected
MultiSense Current Sense pin: it delivers a current proportional to load
current
S_EN
Active high compatible with 3 V and 5 V CMOS outputs pin;
it enables the MultiSense diagnostic pin.
N/A
Not connected
IN
Voltage controlled input pin with hysteresis, compatible with
3 V and 5 V CMOS outputs. It controls OUT switch state.
N/A
Not connected
DocID026135 Rev 1
3/7