EV-VN7003AH Datasheet, PDF (3/8 Pages) STMicroelectronics – VN7003AH Evaluation Board

EV-VN7003AH
2
Board connections
Board connections
Figure 2 shows the placement of the connectors to be used for supplying the evaluation
board, connecting the load and controlling the functionality and diagnostic of the device.
Figure 2. Evaluation board connections
Connector
J3
J3
J3
J3
J3
J3
J3
J3
J3
J3
J3
Table 2. J3 connector: pin functions
Pin number Pin name
Pin function
1…4
N/A
Not connected
5
IN_PullUP
Connection to optional external pull-up resistor for
open load detection in off-state.
6
+5V
5V Power Supply
7
N/A
Not connected
8
MultiSense
Analog current sense output pin delivers a current
proportional to the load current.
Active high compatible with 3 V and 5 V CMOS
9
S_EN
outputs pin; it enables the CurrentSense diagnostic
pin.
10...11
N/A
Not connected
12
N/A
Not connected
Voltage controlled input pin with hysteresis,
13
IN0
compatible with 3 V and 5 V CMOS outputs. It
controls OUT0 switch state.
Voltage controlled input pin with hysteresis,
14
IN1
compatible with 3 V and 5 V CMOS outputs. It
controls OUT1 switch state (Input not available for
single channel)
15…18
N/A
Not connected
DocID029869 Rev 1
3/8
6