E-L6598D013TR Datasheet, PDF (3/24 Pages) STMicroelectronics – High voltage resonant controller

L6598
1
Maximum ratings
Maximum ratings
Note:
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
IS
VLVG
Supply current at V_cl ⁽¹⁾
Low side output
25
mA
14.6
V
VOUT High side reference
-1 to VBOOT -18
V
VHVG High side output
-1 to VBOOT
V
VBOOT Floating supply voltage
618
V
dVBOOT/dt VBOOT pin slew rate (repetitive)
±50
V/ns
dVOUT/dt OUT pin slew rate (repetitive)
±50
V/ns
Vir Forced input voltage (pins Rfmin, Rfstart)
-0.3 to 5
V
Vic Forced input voltage (pins Css, Cf)
-0.3 to 5
V
VEN1, _{Enable input voltage}
VEN2
-0.3 to 5
V
IEN1, IEN2 Enable input current
±3
mA
Vopc Sense op amp common mode range
-0.3 to 5
V
Vopd Sense op amp differential mode range
-5 to 5
V
Vopo Sense op amp output voltage (forced)
4.6
V
Tstg Storage temperature
-40 to +150
°C
Tj
Junction temperature
-40 to +150
°C
Tamb Ambient temperature
-40 to +125
°C
1. The device is provided of an internal clamping zener between GND and the Vs pin, It must not be supplied
by a low impedance voltage source.
ESD immunity for pins 14, 15 and 16 is guaranteed up to 900 (human body model).
Table 2. Thermal data
Symbol
Parameter
R_thJA Thermal resistance junction to ambient
SO16N
120
DIP16
80
Unit
°C/W
Table 3. Recommended operating conditions
Symbol
Parameter
Value
V_S
V_out ⁽¹⁾
V_boot ⁽¹⁾
fmax
Supply voltage
High side reference
Floating supply rail
Maximum switching frequency
10 to Vcl
-1 to Vboot-Vcl
500
400
1. If the condition V_boot - V_out < 18 is guaranteed, V_out can range from -3 to 580 V.
Unit
V
V
V
kHz
Doc ID 6554 Rev 7
3/24