M25P80 Datasheet, PDF (29/41 Pages) STMicroelectronics – 8 Mbit, Low Voltage, Serial Flash Memory With 25 MHz SPI Bus Interface

M25P80
DC AND AC PARAMETERS
This section summarizes the operating and mea-
surement conditions, and the DC and AC charac-
teristics of the device. The parameters in the DC
and AC Characteristic tables that follow are de-
rived from tests performed under the Measure-
ment Conditions summarized in the relevant
tables. Designers should check that the operating
conditions in their circuit match the measurement
conditions when relying on the quoted parame-
ters.
Table 9. Operating Conditions
Symbol
Parameter
Min.
Max.
Unit
V_CC
Supply Voltage
2.7
3.6
V
Ambient Operating Temperature (Device Grade 6)
–40
85
TA
°C
Ambient Operating Temperature (Device Grade 3)
–40
125
Table 10. Data Retention and Endurance
Parameter
Condition
Erase/Program Cycles
Device Grade 6
Device Grade 3 ¹
Data Retention
Device Grade 6
Device Grade 3 ¹ (at 85°C)
Note: 1. This is preliminary data
Table 11. Capacitance
Symbol
Parameter
Test Condition
C_OUT
Output Capacitance (Q)
V_OUT = 0V
C_IN
Input Capacitance (other pins)
V_IN = 0V
Note: Sampled only, not 100% tested, at TA=25°C and a frequency of 20MHz.
Min.
Max.
100 000
10 000
20
20
Unit
cycles per
sector
years
Min.
Max.
Unit
8
pF
6
pF
29/41