M95160-DRE Datasheet, PDF (28/40 Pages) STMicroelectronics – 16-Kbit serial SPI bus EEPROM - 105 C Operation

Delivery state
6
Delivery state
M95160-DRE
The device is delivered with:
• the memory array set to all 1s (each byte = FFh),
• Status register: bit SRWD =0, BP1 =0 and BP0 =0,
• Identification page: the first three bytes define the Device identification code (value
defined in Table 5). The content of the following bytes is Don’t Care.
7
Absolute maximum ratings
Stressing the device outside the ratings listed in Table 8 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Table 8. Absolute maximum ratings
Symbol
Parameter
Min.
Max.
Unit
T_STG
Storage temperature
–65
150
°C
T_AMR
T_LEAD
Ambient operating temperature
Lead temperature during soldering
–40
150
°C
See note ⁽¹⁾
°C
V_O
Voltage on Q pin
–0.50 V_CC+0.6
V
V_I
Input voltage
–0.50
6.5
V
I_OL
DC output current (Q = 0)
-
5
mA
I_OH
DC output current (Q = 1)
-
5
mA
V_CC
V_ESD
Supply voltage
Electrostatic pulse (Human Body Model)⁽²⁾
–0.50
6.5
V
-
4000
V
1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK^®
7191395 specification, and the European directive on Restrictions of Hazardous Substances (RoHS
directive 2011/65/EU of July 2011).
2. Positive and negative pulses applied on pin pairs, in accordance with AEC-Q100-002 (compliant with
ANSI/ESDA/JEDEC JS-001-2012, C1=100 pF, R1=1500 Ω, R2=500 Ω)
28/40
DocID027470 Rev 1