LIS2DE12 Datasheet, PDF (28/51 Pages) STMicroelectronics – Free-fall detection

Digital interfaces
6.2.2 SPI write
Figure 9. SPI write protocol
LIS2DE12
&6
63&
6',
5:
', ', ', ', ', ', ', ',
06 $' $' $' $' $' $'
The SPI write command is performed with 16 clock pulses. A multiple byte write command
is performed by adding blocks of 8 clock pulses to the previous one.
bit 0: WRITE bit. The value is 0.
bit 1: MS bit. When 0, does not increment the address; when 1, increments the address in
multiple writes.
bit 2 -7: address AD(5:0). This is the address field of the indexed register.
bit 8-15: data DI(7:0) (write mode). This is the data that is written inside the device (MSb
first).
bit 16-... : data DI(...-8). Further data in multiple byte writes.
Figure 10. Multiple byte SPI write protocol (2-byte example)
&6
63&
6',
', ', ', ', ', ', ', ', ',',',',',',', ',
5:
06 $' $' $' $' $' $'
28/51
DocID027326 Rev 2