HDMI2C2-14HD Datasheet, PDF (28/31 Pages) STMicroelectronics – ESD protection and signal booster for HDMI™ 1.4 sink interface

Recommendation on PCB assembly
HDMI2C2-14HD
Figure 28. Recommended stencil window position
300 µm
13 µm
500 µm
474 µm
286 µm
7 µm
0.23
0.50
2.3 mm
5.3 mm
750 µm ^{3.8 mm}
2.30
300 µm
1.7 mm
0.25
5.30
Stencil window
Footprint
0.30
0.50
0.25
0.45
5.2
Solder paste
1. Use halide-free flux, qualification ROL0 according to ANSI/J-STD-004.
2. “No clean” solder paste recommended.
3. Offers a high tack force to resist component displacement during PCB movement.
4. Use solder paste with fine particles: powder particle size 20-45 µm.
28/31
DocID024813 Rev1