English
Language : 

STBP110 Datasheet, PDF (27/40 Pages) STMicroelectronics – Overvoltage protection device
◁
STBP110
6
Maximum rating
Maximum rating
Stressing the device above the rating listed in Table 2 may cause permanent damage to the
device. These are stress ratings only and operation of the device at these or any other
conditions above those indicated in Section 3 of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability. Refer
also to the STMicroelectronics™ SURE Program and other relevant documentation.
Table 2. Absolute maximum ratings
Symbol
Parameter
Value
Unit
TSTG
TSLD(1)
TJ
VIN
VOUT
VIO
ILOAD
IREVERSE
ISINK(FLT)
Storage temperature (VIN off)
Lead solder temperature for 10 seconds
Operating junction temperature range (internally limited to Toff)
IN pin input voltage
OUT pin input/output voltage
Input/output voltage (other pins)
Load current (IN to OUT)
Reverse diode current (OUT to IN)
FLT pin sink current
ESD withstand voltage (IEC 61000-4-2, IN pin only)(2)
VESD
Human body model (HBM), model = 2(3)
Machine model (MM), model = B(4)
-55 to 150 °C
260
°C
-40 to 150 °C
-0.3 to 30 V
-0.3 to 12 V
-0.3 to 7
V
1200
mA
500
mA
15
mA
±15 (air),
±8 (contact)
kV
2000
V
200
V
1. Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.
2. System-level value (see typical application circuit, C1 ≥ 1 µF low ESR ceramic capacitor).
3. Human body model, 100 pF discharged through a 1.5 kΩ resistor according to the JESD22/A114
specification.
4. Machine model, 200 pF discharged through all pins according to the JESD22/A115 specification.
Table 3. Thermal data
Symbol
Parameter
Value
Unit
RthJA Thermal resistance (junction-to-ambient)
59(1)
°C/W
RthJC Thermal resistance (junction-to-case)
5.9
°C/W
1. The package was mounted on a 4-layer JEDEC test board with 2 thermal vias connecting from the thermal
land to the first buried plane. The 4-layer PCB (2S2P) was constructed based on JESD 51-7 specifications
and vias based on JESD 51-5.
Doc ID 018687 Rev 3
27/40
 ▷