AN2713 Datasheet, PDF (27/40 Pages) STMicroelectronics – LNB power supply based on the LNBH23 supply

AN2713
6
Software installation
Software installation
Unzip the compressed file and perform the installation by clicking on the SETUP.exe file.
Click on: Windows^® “start” menu -> Program -> STMicroelectronics -> LNBxxx control suite.
The screen shown in Figure 22 appears, with a green light indicating that the hardware and
software are ready to work.
Figure 22. PC to I²C main window
Click to send command
programmed in the
command window
Command window
Status window
Received bits from device
The red "I²C ERROR" indicator signals that the LPT port needs to be configured, and/or the
I²C cable (swap the SCL and SDA, if needed) and power supply need to be checked.
Doc ID 14431 Rev 1
27/40