M95040_09 Datasheet, PDF (25/43 Pages) STMicroelectronics – 4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

M95040, M95020, M95010
8
Maximum rating
Maximum rating
Stressing the device outside the ratings listed in Table 7 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Refer also to the STMicroelectronics SURE Program and other relevant
quality documents.
Table 7. Absolute maximum ratings
Symbol
Parameter
Min. Max. Unit
T_A
Ambient operating temperature
–40
130
°C
T_STG
T_LEAD
Storage temperature
Lead temperature during soldering
–65
150
°C
see note ⁽¹⁾
°C
V_O
Output voltage
–0.50 V_CC+0.6 V
V_I
Input voltage
–0.50
6.5
V
I_OL
DC output current (Q = 0)
5
mA
I_IH
DC output current (Q = 1)
–5
mA
V_CC
Supply voltage
–0.50
6.5
V
V_ESD
Electrostatic discharge voltage (human body model)⁽²⁾ –4000 4000
V
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
2. AEC-Q100-002 (compliant with JEDEC Std JESD22-A114, C1=100pF, R1=1500, R2=500)
Doc ID 6512 Rev 8
25/43