M24C02-A125 Datasheet, PDF (24/39 Pages) STMicroelectronics – Automotive 2-Kbit serial IC bus EEPROM with 1 MHz clock

Delivery state
6
Delivery state
M24C02-A125
The device is delivered as follows:
• The memory array is set to all 1s (each byte = FFh).
• Identification page: the first three bytes define the Device identification code (value
defined in Table 4). The content of the following bytes is Don’t Care.
7
Maximum rating
Stressing the device outside the ratings listed in Table 5 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Table 5. Absolute maximum ratings
Symbol
Parameter
Min.
Max. Unit
Ambient operating temperature
–40
130
°C
T_STG
T_LEAD
Storage temperature
Lead temperature during soldering
–65
150
°C
see note ⁽¹⁾
°C
V_IO
Input or output range
–0.50
6.5
V
I_OL
DC output current (SDA = 0)
-
5
mA
V_CC
V_ESD
Supply voltage
Electrostatic pulse (Human Body model)⁽²⁾
–0.50
6.5
V
-
4000
V
1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS
directive 2011/65/EU of July 2011).
2. Positive and negative pulses applied on pin pairs, according to AEC-Q100-002 (compliant with
ANSI/ESDA/JEDEC JS-001-2012, C1=100 pF, R1=1500 Ω, R2=500 Ω).
24/39
DocID025755 Rev 4