M28W320ECT Datasheet, PDF (22/53 Pages) STMicroelectronics – 32 Mbit (2Mb x16, Boot Block) 3V Supply Flash Memory

M28W320ECT, M28W320ECB
DC AND AC PARAMETERS
This section summarizes the operating and mea-
surement conditions, and the DC and AC charac-
teristics of the device. The parameters in the DC
and AC characteristics Tables that follow, are de-
rived from tests performed under the Measure-
ment Conditions summarized in Table 13,
Operating and AC Measurement Conditions. De-
signers should check that the operating conditions
in their circuit match the measurement conditions
when relying on the quoted parameters.
Table 13. Operating and AC Measurement Conditions
M28W320ECT, M28W320ECB
Parameter
70
Min Max
85
Min Max
90
Min Max
10
Min Max
V_DD Supply Voltage
2.7
3.6
2.7
3.6
2.7
3.6
2.7
3.6
V_DDQ Supply Voltage (V_DDQ ≤
V_DD)
Ambient Operating Temperature
2.7
3.6
2.7
3.6
2.7
3.6 1.65
3.6
– 40 85 – 40 85 – 40 85 – 40 85
Load Capacitance (C_L)
Input Rise and Fall Times
Input Pulse Voltages
Input and Output Timing Ref.
Voltages
50
5
0 to V_DDQ
V_DDQ/2
50
5
0 to V_DDQ
V_DDQ/2
50
5
0 to V_DDQ
V_DDQ/2
50
5
0 to V_DDQ
V_DDQ/2
Units
V
V
°C
pF
ns
V
V
Figure 7. AC Measurement I/O Waveform
VDDQ
0V
VDDQ/2
AI00610
Figure 8. AC Measurement Load Circuit
VDDQ
VDDQ
VDD
0.1µF
0.1µF
DEVICE
UNDER
TEST
25kΩ
CL
25kΩ
Table 14. Capacitance
Symbol
Parameter
C_IN
Input Capacitance
C_OUT
Output Capacitance
Note: Sampled only, not 100% tested.
Test Condition
V_IN = 0V
V_OUT = 0V
CL includes JIG capacitance
AI00609C
Min
Max
Unit
6
pF
12
pF
22/53