AN3209 Datasheet, PDF (22/42 Pages) STMicroelectronics – Developing your M24LR64-R datalogger application for temperature acquisition

Installing the datalogger package on your computer
AN3209
3
Installing the datalogger package on your computer
To install the datalogger package on your computer:
1. Execute the setup.exe file available from http://www.st.com/dualeeprom to install the
M24LR64-R_Datalogger_application_software and copies the following folders on
your computer (see Figure 16):
– USB driver
– .dll files
– Source code of the M24LR64-R_Datalogger_application_firmware
The RFID reader must not be connected to your PC.
2. When the installation is complete, connect the reader to the PC through an USB cable.
3. To install the USB driver, follow the steps described in section 31. of user manual
UM0863 section 3.1.
Figure 16. M24LR64-R_Datalogger_Application_Software folder structure
22/42
Doc ID 17419 Rev 2