X-NUCLEO-6180XA1 Datasheet, PDF (2/4 Pages) STMicroelectronics – Proximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo

Block diagram
1
Block diagram
X-NUCLEO-6180XA1
Figure 1 describes VL6180X expansion board features.
Figure 1. VL6180X expansion board block diagram
9
9/;
$SSOLFDWLRQ
5HJXODWRU ^{9/;H[SDQVLRQERDUG}
9
*3,2B9
6&/B9
6'$B9
*3,2B9
/HYHO
VKLIWHU
*3,2LQWHUUXSW
6&/
6'$
*3,2
9/;
6DWHOOLWHV
FRQQHFWRUV
',63/$<B6(/
*3,2B%
*3,2
H[SDQGHU
*3,2B/

*3,2B5
'LVSOD\
$SSOLFDWLRQ
$UGXLQR
FRQQHFWRUV
*3,2B%LQWHUUXSW
*3,2B/LQWHUUXSW
*3,2B5LQWHUUXSW
2
Laser consideration
The VL6180X contains a laser emitter and corresponding drive circuitry. The laser output is
designed to remain within Class 1 laser safety limits under all reasonably foreseeable
conditions including single faults in compliance with IEC 60825-1:2007. The laser output will
remain within Class 1 limits as long as the STMicroelectronics recommended device
settings are used and the operating conditions specified in the datasheet are respected. The
laser output power must not be increased by any means and no optics should be used with
the intention of focusing the laser beam.
Figure 2. Class 1 laser product label
Compliance
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No.50, dated June 24, 2007.
2/4
DocID027252 Rev 4