WS57C128FB Datasheet, PDF (2/5 Pages) STMicroelectronics – HIGH SPEED 16K x 8 CMOS EPROM

WS57C128FB
ABSOLUTE MAXIMUM RATINGS*
Storage Temperature............................–65° to + 150°C
Voltage on any Pin with
Respect to Ground ....................................–0.6V to +7V
V_PP with Respect to Ground...................–0.6V to + 13V
ESD Protection ..................................................>2000V
OPERATING RANGE
RANGE
TEMPERATURE
Commercial
0°C to +70°C
Industrial
–40°C to +85°C
Military
–55°C to +125°C
V_CC
+5V ± 10%
+5V ± 10%
+5V ± 10%
*_NOTICE:
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device.
This is a stress rating only and functional operation of
the device at these or any other conditions above
those indicated in the operational sections of this
specification is not implied. Exposure to absolute
maximum rating conditions for extended periods of
time may affect device reliability.
DC READ CHARACTERISTICS Over Operating Range with V_PP = V_CC
SYMBOL
PARAMETER
TEST CONDITIONS
V_IL
Input Low Voltage
V_IH
Input High Voltage
V_OL
Output Low Voltage
V_OH
Output High Voltage
(Note 5)
(Note 5)
I_OL = 16 mA
I_OH = – 4 mA
I_SB1
V_CC Standby Current (CMOS) (Notes 1 and 3)
I_SB2
V_CC Standby Current (TTL)
(Notes 2 and 3)
Comm'l
(Notes 1 and 4)
I_CC1
V_CC Active Current (CMOS)
Industrial
Outputs Not Loaded
Military
I_CC2
V_CC Active Current (TTL)
(Notes 2 and 4)
Outputs Not Loaded
Comm'l
Industrial
Military
I_PP
V_PP Supply Current
V_PP
V_PP Read Voltage
I_LI
Input Leakage Current
I_LO
Output Leakage Current
V_PP = V_CC
V_IN = 5.5V or Gnd
V_OUT = 5.5 V or Gnd
MIN
MAX UNITS
– 0.1
0.8
V
2.0
V_CC + 0.3 V
0.4
V
2.4
V
500
µA
15
mA
30
mA
40
mA
40
mA
50
mA
60
mA
60
mA
100
µA
V_CC – 0.4
V_CC
V
–10
10
µA
–10
10
µA
NOTES:
1. CMOS inputs: GND ± 0.3V or V_CC ± 0.3V.
2. TTL inputs: V_IL ≤ 0.8V, V_IH ≥ 2.0V.
3. Add 1 mA/MHz for A.C. power component.
4. Add 4 mA/MHz for A.C. power component.
5. These are absolute voltages with respect to device ground pin and
include all overshoots due to system and/or tester noise.
Do not attempt to test these values without suitable equipment.
AC READ CHARACTERISTICS Over Operating Range with V_PP = V_CC
PARAMETER
SYMBOL ^{57C128FB-35 57C128FB-45 57C128FB-55}
MIN MAX MIN MAX MIN MAX
57C128FB-70 _UNITS
MIN MAX
Address to Output Delay
CE to Output Delay
OE to Output Delay
Output Disable to
Output Float
t_ACC
t_CE
t_OE
t_DF
35
45
55
70
35
45
55
70
20
25
25
25
ns
20
25
25
25
Address to Output Hold
t_OH
0
0
0
0
3-8