RHF43B_11 Datasheet, PDF (2/16 Pages) STMicroelectronics – Rad-hard precision bipolar single operational amplifier

Absolute maximum ratings and operating conditions
RHF43B
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
Unit
V_CC
Supply voltage⁽¹⁾
V_id
V_in
I_IN
T_stg
R_thja
R_thjc
T_j
ESD
Differential input voltage ⁽²⁾
Input voltage range⁽³⁾
Input current
Storage temperature
Thermal resistance junction to ambient⁽⁴⁾⁽⁵⁾
Thermal resistance junction to case⁽⁴⁾⁽⁵⁾
Maximum junction temperature
HBM: human body model⁽⁶⁾
Latch-up immunity
Lead temperature (soldering, 10 sec)
Radiation related parameters
Low dose rate of 0.01 rad.sec^-1
Dose
(up to Vcc = 16 V)
High dose rate of 50-300 rad.sec^-1
(up to Vcc = 16 V)
Heavy ion latch-up (SEL) immune with heavy ions
HI
(up to Vcc = 14 V)
18
±9
±1.2
V_DD-0.3 to 16
45
-65 to +150
125
40
150
2
200
260
300
300
120
V
V
V
mA
°C
°C/W
°C/W
°C
kV
mA
°C
kRad
kRad
MeV.cm²/mg
1. All values, except differential voltage are with respect to network terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output terminal must never exceed V_CC + 0.3 V.
4. Short-circuits can cause excessive heating and destructive dissipation.
5. R_th are typical values.
6. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
V_CC
V_icm
T_oper
Supply voltage
Common mode input voltage range
Operating free air temperature range
3 to 16
V
V_DD to V_CC
V
-55 to +125
°C
2/16
Doc ID 13477 Rev 8