LMV331 Datasheet, PDF (2/12 Pages) National Semiconductor (TI) – General Purpose, Low Voltage, TinyPack Comparators

Absolute maximum ratings and operating conditions
LMV331
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
V_CC
V_ID
V_IN
R_thja
R_thjc
T_stg
T_j
T_LEAD
ESD
Parameter
Supply voltage⁽¹⁾
Differential input voltage⁽²⁾
Input voltage range
Thermal resistance junction to ambient⁽³⁾
SC70-5
SOT23-5
Thermal resistance junction to case ⁽³⁾
SC70-5
SOT23-5
Storage temperature
Junction temperature
Lead temperature (soldering 10 seconds)
Human body model (HBM)⁽⁴⁾
Machine model (MM)⁽⁵⁾
Charged device model (CDM)⁽⁶⁾
Latch-up immunity
Value
5.5
± 5.5
(V_CC-) - 0.3 to (V_CC+) + 0.3
205
250
172
81
-65 to +150
150
260
2000
200
1500
200
Unit
V
V
V
°C/W
°C/W
°C
°C
°C
V
mA
1. All voltage values, except differential voltage, are referenced to V_cc-.
2. The magnitude of input and output voltages must never exceed the supply rail ±0.3 V.
3. Short-circuits can cause excessive heating. These values are typical.
4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
6. Charged device model: all pins and package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
T_oper
V_CC
Operating temperature range
Supply voltage
-40°C < T_amb < +85°C
-40 to +85
°C
2.7 to 5.0
V
2/12
Doc ID 16866 Rev 1