EVAL6482H Datasheet, PDF (2/12 Pages) STMicroelectronics – High power microstepping motor driver with the L6482H

Board description
1
Board description
EVAL6482H
Table 1. EVAL6482H electrical specifications
Parameter
Supply voltage (VS)
Maximum output current (each phase)
External MOSFET R_ds(ON)
Gate driver supply voltage (VCC)
Logic supply voltage
Logic interface supply voltage
Low level logic input
High level logic input
Operating temperature
1. Limited by the mounted sensing resistors.
2. Refer to STD25NF10 datasheet for details.
3. All logic inputs are 5 V tolerant.
Value
10.5 to 85 V
6 A_r.m.s. at 25 °C⁽¹⁾
33 mΩ typical at 25 °C⁽²⁾
7.5 V to 15 V
3.3 V
3.3 V or 5 V
0V
VDD⁽³⁾
-25 °C to +125 °C
Figure 1. Jumper and connector location
External switch
connector
(SW input)
Slave SPI _{FLAG LED BUSY LED}
connector
Master SPI
connector
ADCIN input
Application
area
Power supply connector
(10.5 V - 85 V)
Supply management
connector
(VS, VSREG, VCCREG and GND)
Supply management Phase A
jumpers
connector
Phase B
connector
AM15181v1
2/12
Doc ID 023870 Rev 1