GS-BT2416C2_0709 Datasheet, PDF (19/32 Pages) STMicroelectronics – Bluetooth class 2 module with embedded SPP SW

GS-BT2416C2.AT1
AT command
A.7
AT + BTCMODE
Indicate if the module can be contacted by other Bluetooth devices. This command does not
register any SPP service.
Syntax: AT+BTCMODE=<0,1>
Parameters:
0: The module cannot be contacted by other Bluetooth devices (default)
1: The module can be contacted by other Bluetooth devices
Return value: <OK, ERROR>
A.8
AT+BTDMODE
Indicate if the module can be discovered when an inquiry procedure is performed by other
Bluetooth devices.
Syntax: AT+BTDMODE=<0,1>
Parameters:
0: The module cannot be discovered by other Bluetooth devices (default)
1: The module can be discovered by other Bluetooth devices
Return value: <OK, ERROR
A.9
AT+BTPMODE
Indicate if the module will accept a pairing request incoming from a remote device. The
pairing procedure is necessary in order to authenticate two Bluetooth devices for the first
time.
Once two devices have been paired, authentication of devices is handled automatically
without the need of any re-pairing, unless link-keys are erased on purpose.
Syntax: BTPMODE=<0,1>
Parameters
0: The module does not accept pairing requests from a remote Bluetooth device
(default)
1: The module accepts pairing requests coming from a remote Bluetooth device
Return value: <OK, ERROR>
19/32