ST72325 Datasheet, PDF (185/193 Pages) STMicroelectronics – 8-BIT MCU WITH 16 TO 60K FLASH/ROM, ADC, CSS, FIVE TIMERS, SPI, SCI, I2C INTERFACE

ST72325
DEVICE CONFIGURATION AND ORDERING INFORMATION (Cont’d)
14.3 DEVELOPMENT TOOLS
STMicroelectronics offers a range of hardware
and software development tools for the ST7 micro-
controller family. Full details of tools available for
the ST7 from third party manufacturers can be ob-
tained from the STMicroelectronics Internet site:
http//www.st.com.
Tools from these manufacturers include C compli-
ers, evaluation tools, emulators and programmers.
Emulators
Two types of emulators are available from ST for
the ST72325 family:
■ ST7 DVP3 entry-level emulator offers a flexible
and modular debugging and programming
solution. SDIP42 & SDIP32 probes/adapters
are included, other packages need a specific
connection kit (refer to Table 31)
■ ST7 EMU3 high-end emulator is delivered with
everything (probes, TEB, adapters etc.) needed
to start emulating the ST72325. To configure it
to emulate other ST7 subfamily devices, the
active probe for the ST7EMU3 can be changed
and the ST7EMU3 probe is designed for easy
interchange of TEBs (Target Emulation Board).
See Table 31.
In-circuit Debugging Kit
Two configurations are available from ST:
■ ST7232x-SK/RAIS: Low cost in-circuit
debugger/programmer tool from Raisonance.
The package includes Rlink (USB/ICC
interface), Reva mother board and daughter
board for ST72F325
■ STXF-INDART/USB: Low cost in-circuit
debugging/programming tool from Softec
Microsystems, with USB interface to host PC.
Flash Programming tools
■ ST7-STICK ST7 In-circuit Communication Kit, a
complete software/hardware package for
programming ST7 Flash devices. It connects to
a host PC parallel port and to the target board or
socket board via ST7 ICC connector.
■ ICC Socket Boards provide an easy to use and
flexible means of programming ST7 Flash
devices. They can be connected to any tool that
supports the ST7 ICC interface, such as ST7
EMU3, ST7-DVP3, inDART, ST7-STICK, or
many third-party development tools.
Evaluation boards
Three different Evaluation boards are available:
■ ST7232x-EVAL ST72F321/324/521 evaluation
board, with ICC connector for programming
capability. Provides direct connection to ST7-
DVP3 emulator. Supplied with daughter boards
(core module) for ST72F321, ST72324 &
ST72F521.
Table 31. STMicroelectronics Development Tools
Emulation
Programming
Supported
Products
ST72F325AR
ST7 DVP3 Series
Emulator
Connection kit
ST7MDT20-DVP3
ST7MDT20-T6A/
DVP
ST7 EMU3 series
Emulator
Active Probe & ^{ICC Socket Board}
T.E.B.
ST7MDT20M-
EMU3
ST7MDT20M-TEB ST7SB20M/xx¹
ST72325C,
ST72F325C
ST7MDT20-DVP3
ST7MDT20-T48/
DVP
ST7MDT20J-
EMU3
ST7MDT20J-TEB ST7SB20J/xx¹
ST72325J,
ST72F325J
ST7MDT20-DVP3
ST7MDT20-T32/
DVP
ST7MDT20J-
EMU3
ST7MDT20J-TEB ST7SB20J/xx¹
ST72325K,
ST72F325K
ST7MDT20-DVP3
ST7MDT20-T44/
DVP
ST7MDT20J-
EMU3
ST7MDT20J-TEB ST7SB20J/xx¹
Note 1: Add suffix /EU, /UK, /US for the power supply of your region.
185/193