VT5363_07 Datasheet, PDF (16/23 Pages) STMicroelectronics – Single-chip USB/PS2 optical mouse

Optics assembly
VT5363
Mouse assembly guidelines
Note:
1. Attach the sensor and all other electrical components onto PCB with the exception of
the navigation LED.
2. Form the LED leads and insert the LED into the optical assembly.
3. Fit the optics with aperture to the PCB using the guideposts and feed the navigation
LED leads through their openings. Take care to keep contamination off the sensor
surface. The aperture should self-align to the VT5363 package.
4. Route the USB/PS2 lead through the base plate then fit the base plate.
5. Solder the navigation LED leads and trim.
6. Add mouse top case and feet.
For more details on the optics (including manufacturers), please refer to the STV-363-R01
user manual.
16/23