LIS3DSHTR Datasheet, PDF (16/53 Pages) STMicroelectronics – MEMS digital output motion sensor ultra low-power high performance three-axis “nano” accelerometer

Mechanical and electrical specifications
LIS3DSH
3.4
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 7.
Symbol
Absolute maximum ratings
Ratings
Vdd Supply voltage
Vdd_IO I/O pins supply voltage
Input voltage on any control pin
Vin
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SEL)
A_POW Acceleration (any axis, powered, Vdd = 2.5 V)
A_UNP Acceleration (any axis, unpowered)
T_OP
T_STG
ESD
Operating temperature range
Storage temperature range
Electrostatic discharge protection
Maximum value
Unit
-0.3 to 4.8
V
-0.3 to 4.8
V
-0.3 to Vdd_IO +0.3 V
3000 for 0.5 ms
g
10000 for 0.1 ms
g
3000 for 0.5 ms
g
10000 for 0.1 ms
g
-40 to +85
°C
-40 to +125
°C
2 (HBM)
kV
Note:
Supply voltage on any pin should never exceed 4.8 V
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part.
This is an ESD sensitive device, improper handling can cause permanent damage to
the part.
16/53
Doc ID 022405 Rev 1