STSMIA832 Datasheet, PDF (15/23 Pages) STMicroelectronics – 1.8V/2.8V High speed dual differential line receivers, standard mobile imaging architecture (SMIA) decoder deserializer

STSMIA832
Characteristics
Table 9.
Symbol
Switching characteristics
(R_T = 100Ω ± 1%, C_L = 10pF, over recommended operating conditions unless otherwise
noted. Typical values are referred to T_A = 25°C and V_DD = 2.8V, V_L = 1.8V)
Parameter
Test Conditions
Min. Typ. Max. Unit
t_r
Rise Time LVTTL Output Voltage
(10% to 90%)
t_f
Fall Time LVTTL Output Voltage
(90% to 10%)
t_pLH
Propagation Delay Time (STRB to
V-SYNC, H-SYNC) Low to High _{Strobed Transmission}
t_pHL
Propagation Delay Time (STRB to ^CLASS_SEL=VL
V-SYNC, H-SYNC) High to Low
1.9
2.5
ns
1.6
2.5
ns
6.3
8.5
ns
6.9
8.5
ns
t_pLH
Propagation Delay Time
(STRB to CLK) Low to High
t_pHL
Propagation Delay Time
(STRB to CLK) High to Low
Strobed Transmission
CLASS_SEL=V_L
t_pLH
Propagation Delay
(STRB to D1-D8) Low to High
t_pHL
Propagation Delay
(STRB to D1-D8) High to Low
Strobed Transmission
CLASS_SEL=V_L
t_pLH
Propagation Delay Time (STRB to
V-SYNC, H-SYNC) Low to High _{Clocked Transmission}
t_pHL
Propagation Delay Time (STRB to ^{CLASS_SEL= Gnd}
V-SYNC, H-SYNC) High to Low
t_pLH
Propagation Delay Time
(STRB to CLK) Low to High
t_pHL
Propagation Delay Time
(STRB to CLK) High to Low
Clocked Transmission
CLASS_SEL= Gnd
t_pLH
Propagation Delay
(STRB to D1-D8) Low to High
t_pHL
Propagation Delay
(STRB to D1-D8) High to Low
Clocked Transmission
CLASS_SEL= Gnd
t_EN
Enable Delay Time
(EN to V-SYNC, H-SYNC)
t_DIS
Disable Delay Time
(EN to V-SYNC, H-SYNC)
DR_MAX
T_STRB
t_DS
Max Usable Data Rate
Strobe Target Period
Minimum Data/Strobe Edge
Separation
t_rEN = 2.0ns (10% to 90%)
t_fEN = 2.0ns (90% to 10%)
t_rEN = 2.0ns (10% to 90%)
t_fEN = 2.0ns (90% to 10%)
CLASS_SEL=V_L
CLASS_SEL=V_L
CLASS_SEL=V_L
5.2
5.2
6.8
6.4
6.0
6.0
4.7
4.7
6.0
5.4
1538
780
6.5
ns
6.5
ns
8.5
ns
8.5
ns
7.0
ns
7.0
ns
6.0
ns
6.0
ns
7.5
ns
7.5
ns
20
µs
100
ns
650 Mbps
ps
ps
15/23