TDA7563A Datasheet, PDF (14/35 Pages) STMicroelectronics – 4 x 50W multifunction quad power amplifier with built-in diagnostics feature

Diagnostics functional description
TDA7563A
Figure 20. SVR and output behavior (case 1: without turn-on diagnostic)
Vsvr
Out
Permanent diagnostic
acquisition time (100mS Typ)
Bias (power amp turn-on)
Diagnostic Enable
(Permanent)
FAULT
event
t
Read Data
I2CB DATA
Permanent Diagnostics data (output)
permitted time
Figure 21. SVR and output pin behavior (case 2: with turn-on diagnostic)
Vsvr
Out
Turn-on diagnostic
acquisition time (100mS Typ)
Permanent diagnostic
acquisition time (100mS Typ)
t
Diagnostic Enable
(Turn-on)
Turn-on Diagnostics data (output)
permitted time
Diagnostic Enable
(Permanent)
FAULT
event
Bias (power amp turn-on)
permitted time
Read Data
Permanent Diagnostics data (output)
permitted time
I2CB DATA
The information related to the outputs status is read and memorized at the end of the
current pulse top. The acquisition time is 100 ms (typ.). No audible noise is generated in the
process. As for SHORT TO GND / V_S the fault-detection thresholds remain unchanged from
26 dB to 12 dB gain setting. They are as follows:TDA7563A
Figure 22. Thresholds for short to GND/V_S
S.C. to GND x Normal Operation x
S.C. to Vs
0V
1.2V 1.8V
V_S-1.8V V_S-1.2V
V_S
D01AU1253
14/35