L99PD08 Datasheet, PDF (14/41 Pages) STMicroelectronics – SPI control diagnosis interface device for VIPower M0-5 and M0-5E high side drivers

Absolute maximum ratings
4
Absolute maximum ratings
L99PD08
Table 4. Absolute maximum ratings
Symbol
Parameter
VCORE3 Stabilized supply voltage
VDDIO
Stabilized supply voltage
EN, SCK, DI,
CSN, CLK_INx
/ DO, SYNC,
LHOMEN
Digital input / output voltage
OUT 1-8,
FAULTN
MUX ST/CS
Output current (open drain)
Output current
ST/CS 1-8 Input current
ST/CS 1-8 Input Voltage
Value
Unit
-0.3 to 3.6
V
-0.3 to 5.5
V
-0.3 to VDDIO +
0.3
V
10
mA
1
mA
10
mA
-14 to 6.5
V
Note:
All maximum ratings are absolute ratings. Leaving the limitation of any of these values may
cause an irreversible damage of the integrated circuit.
4.1
Note:
ESD protection
Table 5.
All pins
ESD protection
Parameter
Value
Unit
±2
kV
HBM according to MIL 883C, Method 3015.7 or EIA/JESD22-A114-A HBM with all
unzapped pins grounded
4.2
Operating junction temperature
Table 6.
Symbol
T_j
R_thmax
Operating junction temperature
Parameter
operating junction temperature
Value
Unit
-40 to 150
°C
90
K/W
14/41
Doc ID 15872 Rev 3