M24M01 Datasheet, PDF (13/19 Pages) STMicroelectronics – 1 Mbit Serial I²C Bus EEPROM

M24M01
Table 9. Power-Up Timing and V_th Threshold
Symbol
Parameter
t_PU Time delay to Read or Write instruction
V_th Threshold Voltage
Note: 1. These parameters are characterized only.
Test Condition¹
Min.
1.1
Max. Unit
200
µs
1.4
V
Table 10. DC Characteristics (M24M01-V)
Symbol
Parameter
Test Condition
(in addition to those in Table 5)
ILI
Input Leakage Current
(SCL, SDA, E1, E2, WC)
VIN = VSS or VCC
I_LO Output Leakage Current
0 V ≤ V_OUT ≤ V_CC, SDA in Hi-Z
ICC Supply Current
V_CC =3.6V, f_c=400kHz (rise/fall time < 30ns)
ICC1 Stand-by Supply Current
VIN = VSS or VCC , 2.7 V ≤ VCC ≤ 3.6 V
V_IL
Input Low Voltage
(E1, E2, SCL, SDA, WC)
V_IH
Input High Voltage
(E1, E2, SCL, SDA, WC)
V_OL Output Low Voltage
I_OL = 2.5 mA, 2.7 V ≤ V_CC ≤ 3.6 V
Min.
– 0.3
0.7V_CC
Max. Unit
±1
µA
± 2 µA
2
mA
2
µA
0.3V_CC V
V_CC+1 V
0.4
V
Table 11. DC Characteristics (M24M01-S)
Symbol
Parameter
Test Condition
(in addition to those in Table 6)
Min.
I_LI
Input Leakage Current
(SCL, SDA, E1, E2, WC)
V_IN = V_SS or V_CC
I_LO Output Leakage Current
I_CC Supply Current
0 V ≤ V_OUT ≤ V_CC, SDA in Hi-Z
V_CC =3.6V, f_c=400kHz (rise/fall time < 30ns)
ICC1 Stand-by Supply Current
VIN = VSS or VCC , VCC=3.6 V
V_IL
Input Low Voltage
(E1, E2, SCL, SDA, WC)
– 0.3
V_IH
Input High Voltage
(E1, E2, SCL, SDA, WC)
0.7V_CC
V_OL Output Low Voltage
IOL = 2.5 mA, 2.7 V ≤ VCC ≤ 3.6 V
R_L = 2.2 kΩ, 1.8 V ≤ V_CC ≤ 3.6 V
Max. Unit
±1
µA
± 2 µA
2
mA
2
µA
0.3V_CC V
V_CC+1 V
0.4
V
0.2V_CC V
13/19