LIS331DLF Datasheet, PDF (13/38 Pages) STMicroelectronics – MEMS digital output motion sensor ultra low-power high performance 3-axes “nano” accelerometer

LIS331DLF
Mechanical and electrical specifications
2.4
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 7.
Symbol
Absolute maximum ratings
Ratings
Vdd Supply voltage
Vdd_IO I/O pins supply voltage
Input voltage on any control pin
Vin
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
A_POW Acceleration (any axis, powered, Vdd = 2.5 V)
A_UNP Acceleration (any axis, unpowered)
T_OP
T_STG
Operating temperature range
Storage temperature range
ESD Electrostatic discharge protection
Maximum value
Unit
-0.3 to 6
V
-0.3 to 6
V
-0.3 to Vdd_IO +0.3 V
3000 g for 0.5 ms
10000 g for 0.1 ms
3000 g for 0.5 ms
10000 g for 0.1 ms
-40 to +85
°C
-40 to +125
°C
4 (HBM)
kV
1.5 (CDM)
kV
200 (MM)
V
Note:
Supply voltage on any pin should never exceed 6.0 V
This is a mechanical shock sensitive device, improper handling can cause permanent
damages to the part
This is an ESD sensitive device, improper handling can cause permanent damages to
the part
Doc ID 15101 Rev 4
13/38