UM0382 Datasheet, PDF (12/32 Pages) STMicroelectronics – Evaluation Kit

Graphical User Interface
3
Graphical User Interface
UM0382
To execute the EK3LV02DQ Evaluation Software Graphical User Interface:
1. click on Start > All Programs;
2. select the folder EK3LV02DQ > Executables;
3. launch the program “EK3LV02DQ Ver.1.0”.
With these operations the GUI main window will appear (Figure 9); the window is composed
of four main sections as detailed below:
1. the graphical panel (ref1), where the data coming from the sensor are graphically
represented;
2. the upper-right corner of the window (ref2), which allows to open and to close the
communication port of the PC connected to the Evaluation Kit;
3. the right side, which contains the “Register Read/Write” and “Direction Detection
Demo” (ref3), “Single Acquisition” (ref4) and “About EK” (ref5) blocks;
4. the bottom of the window, which handles the continuous acquisition of the acceleration
data and displays them inside the graphical panel (ref6).
Figure 9. Graphical User Interface: main window
ref1
ref2
ref3
ref4
ref5
ref6
12/32