English
Language : 

TS4962_10 Datasheet, PDF (12/44 Pages) STMicroelectronics – 2.8 W filter-free mono class D audio power amplifier
◁
Electrical characteristics
TS4962
Table 8.
Electrical characteristics at VCC = +3.6 V
with GND = 0 V, Vicm = 1.8 V, Tamb = 25°C (unless otherwise specified)(1)
(continued)
Symbol
Parameter
Min. Typ. Max. Unit
VN Output voltage noise f = 20 Hz to 20 kHz, G = 6 dB
Unweighted RL = 4 Ω
A-weighted RL = 4 Ω
Unweighted RL = 8 Ω
A-weighted RL = 8 Ω
Unweighted RL = 4 Ω + 15 µH
A-weighted RL = 4 Ω + 15 µH
Unweighted RL = 4 Ω + 30 µH
A-weighted RL = 4 Ω + 30 µH
Unweighted RL = 8 Ω + 30 µH
A-weighted RL = 8 Ω + 30 µH
Unweighted RL = 4 Ω + filter
A-weighted RL = 4 Ω + filter
Unweighted RL = 4 Ω + filter
A-weighted RL = 4 Ω + filter
83
57
83
61
81
58
87
μVRMS
62
77
56
85
63
80
57
1. All electrical values are guaranteed with correlation measurements at 2.5 V and 5 V.
2. Standby mode is activated when VSTBY is tied to GND.
3. Dynamic measurements - 20*log(rms(Vout)/rms(Vripple)). Vripple is the superimposed sinusoidal signal to
VCC at f = 217 Hz.
12/44
Doc ID 10968 Rev 8
 ▷