TDA2052 Datasheet, PDF (11/13 Pages) STMicroelectronics – 60W Hi-Fi AUDIO POWER AMPLIFIER WITH MUTE / STAND-BY

As shown in Figure 19, the R-C passive network
for low-pass and High-pass give a cut with a
slope of 12dB/octave
A further advantage of this application is that con-
necting each speaker direcly to its amplifier, the
musical signal is not modified by the variations of
the impedance of the crossover over frequency.
The subwoofer is designed for obtaining high
sound pressure level with low distortion without
stereo effect.
In the application of figure 18, the subwoofer
plays the 20 to 300 Hz frequency range, while the
remaining 300 Hz to 20KHz are sent to two sepa-
rate channels with stereo effect.
The multiway system makes use of three
TDA2052, one for driving the subwoofer with
POUT higher than 40W (THD = 10%), 28W undis-
torted (THD = 0.01%), while the others two
TDA2052 are used for driving the mid/high fre-
quency speakers of L/R channels, delivering
POUT = 25W (THD = 10%) and 20W @ THD =
0.01%
Figure 19: Frequency Response
TDA2052
Figure 20: Distortion vs Output Power
(Subwoofer)
Figure 21:Distortion vs Output Power
(Midrange/Tweeter)
11/13