AN1752 Datasheet, PDF (11/14 Pages) STMicroelectronics – ST72324 QUICK REFERENCE NOTE

ST72324 QUICK REFERENCE NOTE
3.2.3.2 ST7 Emulator: ST7MDT20J-EMU3
The EMU3 is the most recent generation, supporting the new ST7 Flash products. Its features
include:
s Up to 64K breakpoints with 4 level sequencer on both address and data and all control
signals
s 256K real-time trace recording with timestamp
s 9 external input triggers and 2 output triggers
s Read/Write on the fly
s Performance analysis
s Programmable clock frequency from 32kHz to 16MHz
s Low voltage emulation from 1.8V to 5.5V
s Parallel, USB and Ethernet host interfaces
Web: http://www.st.com/mcu>ST MCU Support>Downloads>H/W and S/W Tools
3.3 PROGRAMMING TOOLS
3.3.1 ST7 Visual Programmer: STVP7
STVP7 provides a graphical interface for programming Flash memory and option bytes. This
is the software part of the ST programming tool package. The hardware parts are described
below.
This is available on the STMicroelectronics Microcontroller Development Tools CD-ROM or
can be downloaded from http://www.st.com/mcu>ST MCU Support>Downloads>H/W and S/
W Tools.
3.3.2 ST7 Programming Board: ST7MDT20J-EPB /EU/US/UK
s Supports both Motorola S19 and Intel Hex formats with STVP7 Visual Programming
Software, for programming Flash and EEPROM.
s Supports In-Circuit programming (ICP Connector).
s Can program all microcontrollers regardless of socket type (Socket Programming).
Web: http://www.st.com/mcu>ST MCU Support>Downloads>H/W and S/W Tools
3.3.3 ST7-STICK
STICK connects a PC to ST7 Flash MCUs soldered on application board with an ICP con-
nector.
s Low cost and easy-to-use kit for ICP
s ST7 Visual Programmer graphical user interface
Web: http://www.st.com/mcu>ST MCU Support>Downloads>H/W and S/W Tools
11/14