STM8S207XX Datasheet, PDF (100/103 Pages) STMicroelectronics – Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash

Revision history
14 Revision history
STM8S207xx, STM8S208xx
Table 58. Document revision history
Date
Revision
Changes
23-May-2008
1
Initial release.
05-Jun-2008
Added part numbers on page 1 and in Table 2 on page 11.
2
Updated Section 4: Product overview.
Updated Section 10: Electrical characteristics.
22-Jun-2008
3
Added part numbers on page 1 and in Table 2 on page 11.
12-Aug-2008
Added 32 pin device pinout and ordering information.
Updated UBC option description in Table 13 on page 47.
4
USART renamed UART1, LINUART renamed UART3.
Max. ADC frequency increased to 6 MHz.
20-Oct-2008
Removed STM8S207K4 part number.
Removed LQFP64 14 x 14 mm package.
Added medium and high density Flash memory categories.
5
Added Section 6: Memory and register map on page 33.
Replaced beCAN3 by beCAN in Section 4.14.5: beCAN.
Updated Section 10: Electrical characteristics on page 51.
Updated LQFP44 (Figure 47 and Table 55), and LQFP32 outline and
mechanical data (Figure 48, and Table 56).
08-Dec-2008
Changed V_DD minimum value from 3.0 to 2.95 V.
6
Updated number of High Sink I/Os in pinout.
Removed FLASH _NFPR and FLASH _FPR registers in Table 9:
General hardware register map.
30-Jan-2009
Removed preliminary status.
Removed VQFN32 package.
7
Added STM8S207C6, STM8S207S6.
Updated external interrupts in Table 2 on page 11.
Updated Section 10: Electrical characteristics.
10-Jul-2009
Document status changed from “preliminary data” to “datasheet”.
Added LQFP64 14 x 14 mm package.
Added STM8S207M8, STM8S207SB, STM8S208R8, STM8S208R6,
STM8S208C8, and STM8S208C6, STM8S208SB, STM8S208S8,
and STM8S208S6.
Replaced “CAN” with “beCAN”.
8
Added Table 3 to Section 4.5: Clock controller.
Updated Section 4.8: Auto wakeup counter.
Added beCAN peripheral (impacting Table 1 and Figure 6).
Added footnote about CAN_RX/TX to pinout figures 3, 4, and 6.
Table 6: Removed ‘X’ from wpu column of I²C pins (no wpu
available).
Added Table 11: Interrupt mapping.
100/103
Doc ID 14733 Rev 12