English
Language : 

VNQ7140AJ-E Datasheet, PDF (10/48 Pages) STMicroelectronics – Quad channel high-side driver with MultiSense analog feedback for automotive applications
◁
Electrical specification
VNQ7140AJ-E
2.3
Main electrical characteristics
7 V < VCC < 28 V; -40°C < Tj < 150°C, unless otherwise specified.
All typical values refer to VCC = 13 V; Tj = 25°C, unless otherwise specified.
Symbol
Parameter
Table 5. Power section
Test conditions
Min. Typ. Max. Unit
VCC Operating supply voltage
VUSD Undervoltage shutdown
VUSDReset
Undervoltage shutdown
reset
4 13 28
4
5V
VUSDhyst
Undervoltage shutdown
hysteresis
0.3
RON On-state resistance(1)
IOUT = 1 A; Tj = 25°C
IOUT = 1 A; Tj = 150°C
140
280 mΩ
IOUT = 1 A; VCC = 4 V; Tj = 25°C
210
Vclamp Clamp voltage
IS = 20 mA; Tj = -40°C
IS = 20 mA; 25°C < Tj < 150°C
38
V
41 46 52
VCC = 13 V;
VIN = VOUT = VFR = VSEn = 0 V;
VSEL0,1,2 = 0 V; Tj = 25°C
0.5 µA
ISTBY
Supply current in standby
at VCC = 13 V(2)
VCC = 13 V;
VIN = VOUT = VFR = VSEn = 0 V;
VSEL0,1,2 = 0 V; Tj = 85°C (3)
0.5 µA
VCC = 13 V;
VIN = VOUT = VFR = VSEn = 0 V;
VSEL0,1,2 = 0 V; Tj = 125°C
3 µA
tD_STBY
Standby mode blanking
time
VCC = 13 V;
VIN = VOUT = VFR = VSEL0,1,2 = 0 V; 60 300 550 µs
VSEn = 5 V to 0 V
IS(ON) Supply current
VCC = 13 V;
VSEn = VFR = VSEL0,1,2 = 0 V;
VIN0,1,2,3 = 5 V; IOUT0,1,2,3 = 0 A
10 16 mA
Control stage current
VCC = 13 V; VSEn = 5 V;
IGND(ON) consumption in ON state. VFR = VSEL0,1,2 = 0 V;
All channels active.
VIN0,1,2,3 = 5 V; IOUT0,1,2,3 = 1 A
20 mA
IL(off)
Off-state output current at
VCC = 13 V(1)
VIN = VOUT = 0 V; VCC = 13 V;
Tj = 25°C
VIN = VOUT = 0 V; VCC = 13 V;
Tj = 125°C
0 0.01 0.5
µA
0
3
VF
Output - VCC diode
voltage (1)
IOUT = -1 A; Tj = 150°C
0.7 V
1. For each channel.
2. PowerMOS leakage included.
3. Parameter specified by design; not subject to production test.
10/48
DocID018837 Rev 8
 ▷