UM1479 Datasheet, PDF (10/28 Pages) STMicroelectronics – The M24LR64-R is a dual interface EEPROM which targets a wide range of applications

Getting started
UM1479
1.2.7
Event logger GUI
The event logger GUI window has 3 areas:
1. Set event logger
2. Download from the Event/Data Logger
3. Graph plot
“Set Event Logger” is used to select and configure the threshold limits of sensors. Click on
the “Event Logger Selection” button as shown in Figure 6. Figure 10 shows the Set
EventLogger GUI window.
The Download from DataLogger/EventLogger is used to read the logged data from the
EEPROM. Click on “Download from the DataLogger/EventLogger” button as shown in
Figure 7.
Figure 8 shows the window for downloading the logged data.
Graph Plot is used to plot the logged data on the graph and storing it in .xls format. Click on
“Graph Plot” as shown in Figure 7.
Figure 9 shows the window for this. Check the sensors to choose which plot to see.
Figure 10. Event logger GUI Window
10/28
Doc ID 022381 Rev 1